Series 350 single-line, pre-lubrication metering devices come in two, three, and five-port variants and are designed to be installed directly on the machine or system that requires lubrication. These metering devices were designed for use with single-line, centralized oil and fluid grease lubrication systems. By specifying the relevant order code, Series 350 metering devices can be supplied with main line fittings.

The SL-V metering devices are designed for single-line, high-pressure centralized lubrication systems that dispense lubricants that are compatible with polyurethane seals up to NLGI 2. Individual devices may be easily removed for inspection or replacement, and an indicator pin allows for visual examination of metering device performance. The output may be adjusted externally, and each gadget comes with a transparent polycarbonate protective cover.

The SKF Lincoln SLC metering device has a modular design and is intended for use in high-pressure single-line lubrication systems. Metering screws may be used to control the supply volume, ensuring that each lubrication point receives the proper quantity of oil. The SLC is ideal for a wide range of applications in renewable energy, construction, mining, and heavy industries.

The high-output metering devices of the Series SL-V XL are designed for single-line, high-pressure lubrication systems that dispense lubricants compatible with polyurethane seals up to NLGI 2. The output may be adjusted externally. A visual inspection of the metering device's operation is possible thanks to an indicator stem. Individual meters may be simply removed for inspection or replacement. To replace one SL-11 metering device, two SL-V XL metering devices are required. A transparent polycarbonate protective cap is included with each SL-V XL metering instrument.

Pump Unit - 283167 is a pneumatically driven oscillating positive displacement pump. The pump drive's change-over valve regulates the reciprocating of the pump strokes. The reciprocating pump runs under air pressure and so releases material until the system oil pressure reaches the desired level. A pressure switch, 3/2 way air valve, and components to restrict and control the air operating pressure must be used to turn off and monitor the pump.

Pump model 82570 is a high-volume pump with an air-powered forward stroke that discharges lubricant. The acrylic reservoir is replenished using the strainer filling cap, and has a check/relief valve to relieve pressure on the lubrication line.