Lube Accessories

The LP Series allows you to sample low-pressure systems with a push of a button. It’s ideal for sampling high viscosity oils from 3 psi to 125 psi. It is also ideal for lower viscosity oils at very low return line pressures, approximately 3 to 50 psi.

Lube Accessories

- Reliable: Valve tested to 7800 psi (538 bar) for 1 million cycles
- Patented elastomeric valve seals vacuum tight
- Popular mobile standard 2mm probe, compatible with SOS, Probalizer, and Quick Draw valves
- Offers a wide variety of disposable & reusable probes
- Dynamic sampling up to 4000 psi (276 bar) (probe dependent)
- Very low purge volume
- Higher flow for low pressure applications
- Environmentally friendly plating

Lube Accessories

Easy push to open - release to close action.
- Reliable: Dual sealed design independently tested at 7800 psi for one million cycles
- Patented elastomeric valve seals vacuum tight at 27 in Hg
- Unique 360° rotating spout offers convenient sampling and installation without swivel fittings
- Corrosion resistant stainless steel chain and clip with no exposed springs
- Cost effective - no probes needed
- Rugged spout design with easy to grip knurled cap
- Nickel plating offers over 5 times the industry standard corrosion protection

Lube Accessories

V Series Valves are used with full flow dispensers where feed rate adjustment is desired at the point of lubrication.

Lube Accessories

Liquid Level Gauge Sample Ports provide easy viewing of fluid levels and oil condition in many industrial applications. They are ideal for bearing housings and other non-pressurized applications. Liquid Level Gauge Sample Ports include a Pitot Tube for static sampling, which provides repetitive, representative oil sampling.

Lube Accessories
  • Protective cap seals against dirt and moisture
  • Cap connected to sample port with a heavy brass chain to prevent loss
  • Sample directly from lubricating oil while equipment is running
  • Minimizes introduction of contamination to system
  • Used in conjunction with proper accessories sample ports are adaptable to pressure, static, and vacuum locations

Lube Accessories

Draw representative oil samples with our Sampling Kit. The kit is designed to work with the Condition Monitoring Pod and the Hub (standard flow sampling probe).

Specs: Vacuum pump, 6’ LDPE tubing, standard flow sampling probe, 1 (16 oz) purge bottle, 4 (4 oz) sample bottles

Lube Accessories

Draw representative oil samples with our Sampling Kit. The kit is designed to work with the Hub (high flow sampling probe).

Specs: Vacuum pump, 6’ LDPE tubing, high flow sampling probe, 1 (16 oz) purge bottle, 4 (4 oz) sample bottles

Lube Accessories

Trico's Vacuum Pump is an essential instrument for extracting an oil sample from the sample port and is small enough to transport. The user may connect to any sample port using a sample port adapter, flexible tubing, and a 4-ounce oil sample container for contamination-free oil sampling at the most representative places.