The ATR is a benchtop device that employs the science of Attenuated Total Reflectance (IR Spectroscopy) to eliminate the anomaly of crew errors during re-agent mixing or sample size. It transforms on-board testing by removing the need for reagents, chemical mixing, and precise sample quantities.

A reagentless test analyser, the ATR Analyser is safe and highly cost effective and can be used in a wide range of applications to provide reliable trending analysis of oil and fuel parameters.

The ATR Analyser enable multiple tests to be conducted using a single product, it can determine the physical and chemical condition of oil and fuel, as well as detect any traces of contamination.

The Fe2+ and Fe3+ compounds in used scrape down oil are measured in parts per million (PPM) using the Parker Kittiwakes patent Cold Corrosion Test Kit. Knowing the PPM enables more informed judgments when adjusting feed rates and the oil's Base Number (BN).

Parker Kittiwakes patent Cold Corrosion Test Kit is a quick, simple to use chemical test that provides an accurate measure of the parts per million (PPM) value of Fe2+ and Fe3+ compounds in used scrape down oil. Rather than simply giving a figure for the total iron (including metallic compounds), which other tests provide, knowing the specific PPM of corroded iron allows informed decisions to made in adjustments to feed rates and the Base Number (BN) of the oil used. The quick test (<5 minutes per cylinder) allow rapid analysis of the whole engine. No long waiting periods are required to obtain accurate measurements. Coupled with tests to measure the metallic content (such as Parker Kittiwakes LinerSCAN or Analex Alert), the cause of high levels of iron can accurately be determined. High Iron levels caused by scuffing incidents or Catalytic Fines in bunker fuels can be isolated from cold corrosion issues. Conversely, corrosion caused by sulphuric acid corrosion of the liners can be isolated from other wear mechanisms in the cylinder chamber.

The DIGI Field Kit is a full set of low-cost testing equipment suitable for everyday analysis. These oil test kits enable condition monitoring, allowing the user to make knowledgeable decisions concerning key equipment. Out-of-spec fuels and lubricants can be detected early on before they become essential.

Parker Kittiwake's DIGI Field Kit provides a complete set of economically priced testing equipment, offering a level of accuracy suited for routine analysis. These oil test kits provide condition monitoring that allows the user to make informed operational and maintenance decisions about critical equipment. The ability to test on-site at the point of use enables engineers and facilities managers to conduct oil analysis quickly and easily. Detecting out-of-spec fuels and lubricants can identify potential problems, before they become critical. The DIGI Field Kit allows for a wide range of monitoring, using the tests individually or combined.

FailureProtect™ Service

Portable particle counting instrument for oil-based liquids

The PAMAS S40 AVTUR is a portable particle counter for the analysis of turbine fuels, petrol and diesel.