Clean Diesel Carts are the perfect solution for fuel transfer and kidney loop applications. A high efficiency fuel filter and water absorber (included) work together to ensure that your diesel is both clean and dry.

Donaldson Clean Diesel Kits provide simple, effective outlet filtration on fuel dispensers to allow you to pump clean fuel into your vehicles and equipment.

Clean Solutions filter heads feature robust, aluminum construction with steel inserts to minimize metal-to-metal galling between the head and the filter, even when used with diesel fuel.

Premium Donaldson Blue® Clean Solutions filters provide unsurpassed cleanliness in a single pass. They are perfect for inlet and outlet filtration applications. Their spin-on design enables fast and simple filter changes without special tools and provides greater protection from contamination during service than traditional cartridge style filters.

Clean Solutions Filter Manifolds extend service intervals or increase flow rate beyond the capability of a single or dual filter head. Two or more manifolds can be plumbed together to accommodate even larger flow rates.

Dual-line systems deliver a precise, measured amount of oil to up to 2 000 lubrication locations over lengths of up to 120 meters (131 yards) and beyond. Dual-line systems offer enough lubrication for the remainder of the system's lubrication points even if one pair of outlets inside one metering device becomes clogged. Lubricant volume can be metered separately for each pair of outlets and visibly or electrically monitored.

CJC® Filter Separators are offline oil filtration solutions/oil separators with an integrated circulating pump that combine fine filtration and water separation all in one device. They're made for hydraulic oil, diesel fuel, lubricating oil, and other liquids where water infiltration is a chronic or recurring issue.

Electrical or visual Filter Service Indicators tell you when to change your filters – helping you maintain desired ISO cleanliness levels.

Visual and electrical indicators are all available to help you maintain analyze system performance optimize filter service cycles.

Electrical or visual Filter Service Indicators tell you when to change your filters – helping you maintain desired ISO cleanliness levels.

Visual and electrical indicators are all available to help you maintain analyze system performance optimize filter service cycles.

CJC® Fine Filters are off-line oil filtering systems with integrated circulating pumps. The filters are well known as very effective purification systems for hydraulic oil, lubricating oil, gear oil, quenching oil, phosphate esters, and other fluids.

Keep your machines safe even in the most extreme environments. Maintain safety and security during activities involving employees, high-value plant, and capital equipment.

APPLICATION
The CJC® Gear Flushing Unit, GFU is designed for fast and efficient cleaning of

• New or refurbished gearboxes
• Gearbox test systems on workshop floors and onsite.

It maintains the oil contamination level low during the flushing process and reduces this period to a minimum. Furthermore, the CJC® Gear Flushing Unit has an integrated CJC® Oil Contamination Monitor, OCM15, that measures the oil contamination level. 

Adapters, flanges, gauges, test points and other accessories provide many options to monitor system cleanliness and assist with the collection of fuel and oil samples. We offer everything you need to ensure that your systems continue to operate at their peak performance levels.

Adapters, flanges, gauges, test points and other accessories provide many options to monitor system cleanliness and assist with the collection of fuel and oil samples. We offer everything you need to ensure that your systems continue to operate at their peak performance levels.

Acid/ion neutralizing Filter Inserts are paired with conventional 3-micron absolute Fine Filtration Inserts with a high dirt-holding capacity in the Ion Exchange / Acidity Removal Filter.

Series 350 single-line, pre-lubrication metering devices come in two, three, and five-port variants and are designed to be installed directly on the machine or system that requires lubrication. These metering devices were designed for use with single-line, centralized oil and fluid grease lubrication systems. By specifying the relevant order code, Series 350 metering devices can be supplied with main line fittings.

The SL-V metering devices are designed for single-line, high-pressure centralized lubrication systems that dispense lubricants that are compatible with polyurethane seals up to NLGI 2. Individual devices may be easily removed for inspection or replacement, and an indicator pin allows for visual examination of metering device performance. The output may be adjusted externally, and each gadget comes with a transparent polycarbonate protective cover.

The SKF Lincoln SLC metering device has a modular design and is intended for use in high-pressure single-line lubrication systems. Metering screws may be used to control the supply volume, ensuring that each lubrication point receives the proper quantity of oil. The SLC is ideal for a wide range of applications in renewable energy, construction, mining, and heavy industries.

The high-output metering devices of the Series SL-V XL are designed for single-line, high-pressure lubrication systems that dispense lubricants compatible with polyurethane seals up to NLGI 2. The output may be adjusted externally. A visual inspection of the metering device's operation is possible thanks to an indicator stem. Individual meters may be simply removed for inspection or replacement. To replace one SL-11 metering device, two SL-V XL metering devices are required. A transparent polycarbonate protective cap is included with each SL-V XL metering instrument.

For demanding applications in nearly all industries

Multi-line pump units supply lubricant to lubrication points without extra metering devices. Thus, each lubrication point has its own pumping element. The system design is simple, accurate and most reliable. Multi-line pumps can be actuated mechanically, electrically or hydraulically. The easily exchangeable pumping elements are usually operated by eccentric cam. By selecting pumping elements with different piston diameters and/or stroke settings, an individual lubrication volume setting per pump outlet is possible.